Custom Antimicrobial Electrostatic Air Conditioner Filters
CUSTOM ALUMINUM FRAME FILTERS
Custom Antimicrobial Electrostatic air conditioner, heat pump and furnace (HVAC) filters are amongst the best aluminum frame filters on the market today for air conditioning and heating (HVAC) systems.
This permanent, Custom Antimicrobial Electrostatic 100% aluminum frame air filter features a patented anti-bypass seal, to eliminate bypass to ensure that all the air and pollutants go through the AC Air filter and not around it.
When your air conditioner, heat pump or furnace (HVAC) turns on, the difference in pressure causes an air tight seal. No bypass means your filtering 100 % of the air.
It has permanently attached, electrostatic screen to enhance performance and a rubber seal on the top of the filter for a complete seal when the air conditioning and heating (HVAC) system cycles on.
The pads are treated with an antimicrobial tacky film that may help kill bacteria, dust mites, and other harmful airborne pollutants on contact before it gets into your air conditioning and heating (HVAC) system
The initial kit comes with a custom sized frame (LIFETIME WARRANTY) and 6 month supply of pads.
All you have to do is change the pads once a month and you will enjoy improved indoor Air Quality and a healthier indoor breathing environment.
Getting your custom antimicrobial electrostatic air filter is easy!
First thing we need are the correct measurements for your custom antimicrobial electrostatic air Conditioner filter. Universal Air & Heat recommends that you schedule a appointment to have one of our air conditioning technicians / indoor air quality specialists come out to your home and take the correct measurements. If you are going to measure the filter yourself make sure to measure a ¼ inch to small for fitting purposes do not try to get the exact size as this will cause the filter to have a tight fit and may be difficult to work with or may not fit at all.
The Custom Antimicrobial Electrostatic Air Conditioner Filter kit will be delivered within two weeks from the order date.
When it comes time to reorder pads its fast and easy just call the phone number printed on the side of your filter, give the customer service representative the filter reorder # and the amount of filters you would like to order, pay by credit card then your 6 or 12 month supply of pads will be delivered to your door right away.
Forget about the hassles of trying to buy air filters from a store!
A single phone call and we’ll rush them right to your door, so you’ll never have to wait in line for air filters again!
Call today 866-999-2665 (COOL)
Custom Antimicrobial Electrostatic Air Conditioner Filter Kit including 6 month supply of pads.
TACKY ANTIMICROBIAL TREATED PADS
Antimicrobial treated; dry tactified polyester media. Its microbe shield not only eliminates the filter as a potential breeding ground for micro-organisms, it also controls airborne germs.
Replace every 30- 60 days.
87% @ .50″ w.g. Airflow: .09″ w.g. @ 300 fpm Antimicrobial treated; dry tactified polyester media features a special dual density design
to allow for an extended 60 day filter life and a 60% increase in efficiency over regular pads.
93% @ .50″ w.g. Airflow: .19″ w.g. @ 300 fpm
Carbon pads acts like a molecular magnet.Its enormous surface captures and hold gases and odors.
It adsorbs odors from pets, cooking, cigarettes, and chemicals.
These pads can be used with other medias. Replace every 90 days.
CUSTOM ELECTROSTATIC FILTERS
The air filter body is constructed with 5 layers of media (not just three like others) and surrounded by a rugged aluminum filter frame. A unique combination of Polypro with Polyurethane foam media attract and hold the airborne pollutants inside the layers of the electrostatic filter until they are released by washing.
The filter media also contains ViBax MI-50, an anti-microbial agent that works to limit and control airborne bacteria, germs, fungi (mold spores and mildew) as well as reduce odors.
Electrostatic Filters are designed to be a direct replacement for your existing throw-away filter, which means there are no electrical connections or modifications necessary.
Electrostatic Filters are built to last, and come backed by a Lifetime Warranty
Changing Your Anti-Microbial Electrostatic Filter Media Is Easy!
Air Filtration Options:
You choose from many types of air filtration refills for your new air conditioner, heat pump and Furnace (HVAC) filter.
You can use our popular BioSponge, BioSponge plus®, or our ultra-efficient MicroSponge® refills.
All offer outstanding protection from airborne contaminants.
Select the refills that fits your needs.
You can also choose to add an activated carbon or zeolite refill, if you wish to control odors and V.O.C.’s.
Replaceable air conditioner, heat pump and furnace (HVAC) filter refills assure a new, fresh air conditioner, heat pump or furnace (HVAC) filter every time. No more guessing if your air conditioner, heat pump or furnace (HVAC) filter is really clean and healthy.
Anti-Microbial Electrostatic Filter Media Refills
Antimicrobial treated; dry tactified polyester media. It’s AEGIS microbe shield not only eliminates the filter as a potential breeding ground for micro-organisms, it also controls airborne germs. replace every 30 days . Arrestance : 87% @ .50″ w.g. Airflow: .09″ w.g. @ 300 fpm
Antimicrobial treated; dry tactified polyester media. features a special dual density design to allow for a extended 60 day filter life and a 60% increase In efficiency over regular BioSponge. Arrestance : 93% @ .50″ w.g. Airflow: .19″ w.g. @ 300 fpm
This extended surface filter media is produced from a high quality blend of natural and man-made fibers. Pure Pleat 40 offers an excellent combination of high efficiency and low resistance to air flow. Replace every 90 days. Arrestance : 95% @ .50″ w.g. Airflow: .18″ w.g. @ 300 fpm
This extended surface filter media is produced from a high quality blend of natural and man-made fibers like the Pure Pleat 40 with the addition of antimicrobial protection. Replace every 90 days. Arrestance : 95% @ .50″ w.g. Airflow: .18″ w.g. @ 300 fpm
It’s special blend of polymers create a high stable active charge on every fiber. Microsponge has the highest efficiency and the lowest pressure drop of any charged media in the world. Replace every 90 days. Arrestance : 97% @ .50″ w.g. Airflow: .17″ w.g. @ 300 fpm
Odor & VOC Control
Activated carbon acts like a molecular magnet. It’s enormous surface captures and hold gases and odors. It adsorbs odors from pets, cooking, cigarettes, and chemicals. Actasorb can be used with other medias. Replace every 90 days.
A natural earth mineral thermally bonded to polyester. Zeolite has the ability to remove Votile Organic Compounds. It is especially useful in removing Ammonia and ammonium compound odors such as pet odors and urine. Replace every 90 days
FLEX FRAME CUSTOM AC AIR FILTER
- Flexible Frame
- 5-Stage Filtering
- ViBax™ MI-50 Antimicrobial
- Thin and Flexible
- 10 Year Warranty
- Simply install your Electrostatic Air Filter where your old air conditioner, heat pump or furnace (HVAC) filter was located.
- The arrow on the filter frame indicates the direction of the air flow.
- Air will travel in through the light side of the filter and out through the dark side.
Filters will typically need cleaned on a monthly basis, depending on the environment.
To clean, remove your filter and use a brush or vacuum to remove dry dust.
Next, rinse with water in the opposite direction of the airflow arrow.
Then repeat on the other side. If necessary, an all-purpose cleaner such as Formula 409® or Fantastic® can be used.
After using, rinse thoroughly, drain excess water until dry and reinstall.
Don’t expose your filter to direct sunlight or extreme heat for any extended period of time, and never use oil or other chemical sprays on your filter.
Custom Air Filter Advantages
Odd size air conditioner, heat pump or furnace (HVAC) filter?
We hand make every air conditioner, heat pump and furnace (HVAC) filter frame to your exact size, so you’ll always have a filter that fits perfectly!
It’s the last air conditioner, heat pump or furnace (HVAC) filter you will ever purchase.
All custom air conditioner, heat pump and furnace filter frames are backed by a lifetime warranty!
This custom filter frame has a lifetime guaranteed to be free of defects in workmanship and material.
If necessary Universal Air & Heat will repair or exchange, at their option, free of charge, any filter frame which will appear defective in material or workmanship.
This warranty does not cover any filter frame which has been tampered with or altered in any way, or which has been subject to abuse, misuse, negligence, corrosives, unusual operating conditions, accident or careless handling, heat in excess of 230 F., improper installation or repairs by anyone outside of Universal Air & Heat.
Universal Air & Heat unconditionally guarantees all merchandise. If you are not completely satisfied with your purchase, you may return merchandise in new condition, with its original packaging and accessories for a prompt refund within 30 days. Components that are not returned with all items intact will result in the issuance of a prorated
credit based on the cost of the missing items, please notify Universal Air & Heat within 30 days of receipt. We will contact you to issue a return #. Please email the following information to us using our convenient contact form and the best time to contact you. Or call us 1-866-999-2665 (COOL).
For your protection, please insure the package and use a shipping method that is “traceable” such as UPS, Airborne, or Federal Express.
What happens if I order the wrong size custom made filter?
Because our custom made filters are constructed from one continuous piece of aluminum, we cannot re-size them once they are made. We understand that sometimes mistakes happen so if your filter does not fit properly we will arrange make you a new one in the correct size and ship it out to you. If universal Air & Heats technician measures the filter and it comes to you as a wrong size will gladly replace the filter at no charge however if you measure your own filter and place the order by phone or email and it is wrong size, we will require you to ship back the incorrect size and we will have a new correct size filter sent to you..
Contact us by using our convenient contact form or call 1-866-999-COOL (2665)
What if my order is incomplete, incorrect or damaged?
Universal Air & Heat is committed to providing excellent customer support. If your order is incomplete, incorrect or damaged, please contact us using our convenient contact form or you can call us toll free during office hours Monday through Saturday, 8:00 am to 6:00pm eastern standard time at 1-866-999-COOL (2665)
Frequently asked questions
Q: Are the filters disposable?
A: The aluminum filter frame is permanent. The filter material that is placed into the frame is disposable.
Q: How often do I need to change my air conditioner, heat pump or furnace filter?
A: That depends on which type of filter material is chose. Filter refills last between 30 – 90 days.
Q: What is a MERV rating?
A: MERV stands for the Minimum Efficiency Reporting Value, and is a measure of a filter’s worst-case efficiency performance. The higher the MERV rating, the more efficient the filter.
Q: How do I know which way to insert my refills ?
A: The Biosponge and Biosponge Plus material has a writing across one side of the filter, this will be facing you when you place the material into the frame. The pleated refills,(Microsponge, BioPleat, or PurePleat) will have the wire backing against the mesh of the frame, and the white pleat is facing you.
Q: The electrostatically charged screen has become dirty (spots, looks like embedded debris) and I would like to know what cleaning solution (409, Clorox, etc.) I can clean the screen without disturbing its purpose. Also, can I take a brush to it with the solution?
A: You can use any household cleaner, like 409, or Fantastic. Just spray on, let it sit 5 minutes, and hose it off. You can also lightly brush it if necessary.
Q: What can be the consequences if the air conditioner, heat pump or furnace filter is not replaced?
A: An air conditioner, heat pump or furnace filter left in place past its effective replacement time can become clogged by trapped dust and debris thereby restricting airflow, which can lead to air conditioning and heating system (HVAC) damage. It is therefore necessary to ensure timely replacement of the filter.
Q: Which way should the air flow?
A: The air should flow according to direction shown on the air filter’s label.
Q: Do you guarantee your air conditioner, heat pump and furnace (HVAC) filters?
A: Yes. We guarantee our AC Filters, heat pump and furnace (HVAC) filters for 10 years from date of purchase.
Q: Do more efficient filters require me to retrofit my system to make them work?
A: No. Genuine Air Sponge filters for your furnace are 3/4 inch deep, and will slide into your existing filter track.
Q: I am using a standard cardboard frame fiberglass filter. Are they effective?
A: No! These type filters are sometimes referred to in the industry as “non-filters.” Yes, they will trap some airborne particulate, but not as much as genuine Air Sponge filters.
Q: Should I have my air ducts cleaned before investing in a Health Smart Filter?
A: It is not mandatory but we do suggest having your AC air ducts cleaned in order to maintain best possible indoor air quality.